Toilet Repair in Palm Beach

Usually a faulty flapper, fill valve, or flush valve. These are inexpensive repairs that stop water waste and save money on your water bill.

A running toilet can waste 200+ gallons per day, adding $50-100+ to your monthly water bill. Fixing it quickly pays for itself.

Toilets made before 1994 use 3.5-7 gallons per flush. Modern toilets use 1.28 or less. If repairs exceed $150-200, replacement often makes more sense.

Yes. We are experienced with premium fixture brands including Waterworks, Rohl, Kohler, and Toto. These fixtures often require brand-specific parts and careful handling to maintain both function and finish. We source the correct components and service these fixtures properly rather than substituting generic parts.

Depending on the condition and model, some vintage toilets can be repaired with period-appropriate or compatible modern components. In other cases, the fixture may be beyond serviceable condition and replacement becomes necessary. We assess each situation carefully and discuss your options — including preservation-focused approaches for historically significant fixtures.

A leak at the base typically means the wax ring seal between the toilet and flange has failed, or the flange itself is damaged. This allows water to escape with each flush. It is important to address this quickly — water seeping under the base can cause significant subfloor and floor covering damage. We inspect, replace the wax ring, and repair the flange if needed.

A continuously running toilet can waste between 200 and 500 gallons of water per day depending on severity. Over a month, that is 6,000–15,000 gallons — significant both for your water bill and for conservation. Running toilets are usually caused by a worn flapper or faulty fill valve, both of which are inexpensive parts that we can replace quickly.

Yes. Even with whole-home water filtration — common in Palm Beach estates — the flush valve seat can develop mineral pitting over years of use. A pitted or corroded seat prevents the flapper from forming a complete seal, causing the toilet to run continuously even with a new flapper installed. Replacing the full flush valve assembly resolves this permanently.

Flappers are not universal — the correct size and style depends on your toilet's flush valve design. Using the wrong flapper causes improper sealing and a running toilet. For premium brands common in Palm Beach — Waterworks, Rohl, Toto — it is especially important to use manufacturer-specified parts rather than generic hardware store flappers. We identify the correct component before replacing anything.