Toilet Repair in Lighthouse Point

Usually a faulty flapper, fill valve, or flush valve. These are inexpensive repairs that stop water waste and save money on your water bill.

A running toilet can waste 200+ gallons per day, adding $50-100+ to your monthly water bill. Fixing it quickly pays for itself.

Toilets made before 1994 use 3.5-7 gallons per flush. Modern toilets use 1.28 or less. If repairs exceed $150-200, replacement often makes more sense.

A toilet from 1968 is likely using 5–7 gallons per flush — far more than the 1.28–1.6 gpf of modern models. Original parts are rarely available, and the porcelain itself may have hairline cracks or worn glazing. In most cases, a new toilet is a better investment than attempting to restore a 50+ year old fixture. We assess the specific condition and give you an honest recommendation.

Lighthouse Point's canal network creates a persistently humid, salt-air environment around homes. Metal supply line fittings and braided stainless supply lines are particularly susceptible — the fittings can corrode and the braided jacket can degrade, eventually causing a leak or burst. We recommend inspecting and proactively replacing supply lines in Lighthouse Point homes, especially those on exterior walls or in unconditioned spaces.

A flange repair involves removing the toilet, inspecting the existing flange for cracks, corrosion, or incorrect height, and either capping the flange with a repair ring, shimming it to the correct height, or — if severely damaged — replacing it entirely. We then install a new wax ring and reinstall the toilet level and secure. It is usually a same-day repair.

Yes. Outdoor bathrooms and pool houses in Lighthouse Point face the most aggressive corrosion conditions, with direct salt air exposure on fixtures, supply lines, and shutoff valves. We service and replace toilets, supply lines, and shutoff valves in these spaces and can recommend corrosion-resistant components where appropriate.

Salt air primarily affects the external components — supply line fittings and shutoff valves. The flapper and flush valve inside the tank are protected from direct salt air exposure but are still subject to Lighthouse Point's hard, chlorinated municipal water. Flappers degrade faster in high-chlorine environments, and flush valve seats can develop mineral deposits that prevent a clean seal. We recommend inspecting both during any toilet service call.

For Lighthouse Point homes, we recommend silicone or chloramine-resistant flappers over standard rubber flappers. The elevated chlorine in municipal water breaks down rubber compounds faster, shortening flapper life. Silicone flappers are more resistant to chemical degradation and typically last two to three times longer in South Florida water conditions. They are a modest upgrade that avoids more frequent service calls.