Toilet Repair in Pompano Beach

Usually a faulty flapper, fill valve, or flush valve. These are inexpensive repairs that stop water waste and save money on your water bill.

A running toilet can waste 200+ gallons per day, adding $50-100+ to your monthly water bill. Fixing it quickly pays for itself.

Toilets made before 1994 use 3.5-7 gallons per flush. Modern toilets use 1.28 or less. If repairs exceed $150-200, replacement often makes more sense.

Weak flushing without a clog is usually caused by calcium or mineral scale blocking the rim jets under the toilet bowl rim. These small holes spray water around the bowl during a flush, and when blocked with scale they reduce the flush's water distribution and power. Descaling the jets or replacing an older toilet with modern low-flow technology can restore proper flush performance.

A rocking toilet is usually caused by a damaged, corroded, or improperly set flange, or by a failed wax ring that no longer holds the fixture firmly to the floor. It can also result from uneven floor tile or a toilet that was never properly shimmed at installation. We lift the toilet, inspect the flange and subfloor, replace the wax ring, and reinstall it correctly with any shimming needed to eliminate movement.

Yes. We regularly service toilets in Pompano Beach condominium units. Toilet repairs in condos typically do not require coordination with the building — they involve shutting off the individual unit's supply valve and working within the bathroom. If building shutoff is needed, we coordinate with management as required.

Most toilet repairs — replacing a flapper, fill valve, supply line, or wax ring — take between 30 minutes and 1.5 hours depending on the issue and fixture accessibility. A full toilet removal and replacement typically takes 1–2 hours. We provide a time estimate along with the cost estimate before starting.

Yes. A fill valve that doesn't shut off properly keeps water running into the overflow tube and down the drain — a silent waste of hundreds of gallons per day. Beyond water cost, an overworked fill valve wears out faster and can eventually fail completely, causing the tank to overflow. In Pompano Beach's older homes, we often find fill valves that have been slowly failing for months before the homeowner notices.

A flapper leak allows water to drain slowly from the tank into the bowl when no flush occurs — you may hear intermittent running or see ripples in the bowl. An overflow tube issue occurs when the fill valve float is set too high, causing the water level to rise above the top of the overflow tube and drain continuously. You can distinguish them by checking the water level in the tank: if it is at or above the overflow tube rim, it is a fill valve float issue. We adjust or replace accordingly.